|Max. LAN Data Rate:||300Mbps||Standards And Protocols:||802.11.b/g/n (Wi-Fi 4)|
|CPU:||Qualcomm MIPS 650Mhz Frequency||Wi-Fi Supported Frequency:||2.4G|
|Function:||FireWall, QoS, VPN, 4G To LAN||Operating Temperature:||-40～+75ºC (-40～+167°F)|
|Memory:||Onboard SMD DDR2 128MB||LAN Ports:||8.4 (10M/100M Adaptive MDI/MDIX Ports)|
|Support:||ODM And OEM|
DDR2 128MB Dual Band Router,
USB Industrial Router 300Mbps,
GPS Beidou USB Industrial Router
New Design X2 Dual Band VPN WiFi Gateway 5 Porst GPS Beidou Double Star Positioning USB Industrial Router with SIM Card
YLX-X2L5 4G dual-card industrial router supports 4G, WiFi4, wired network and other access methods, has an open architecture design, provides fast and flexible customization; can realize local real-time data analysis and intelligent processing; adopts industrial-grade standard design, wide Temperature, wide pressure, dustproof, strong electromagnetic interference resistance. Equipped with multiple hardware protections, with an external watchdog circuit, it can run stably even in harsh environments, adapt to different industry scenarios, and use public wireless networks to provide users with wireless data transmission functions.
Mainly in areas with harsher environments, we provide various network support for everyone. Now it has been widely used in M2M industries in the IoT industry chain, such as smart grid, intelligent transportation, finance, supply chain automation, industrial automation, intelligent buildings, fire protection, public safety, environmental protection, meteorology, digital medical care, telemetry, agriculture , forestry, water, coal, petrochemical and other fields.
4G industrial router series products are IoT wireless router products integrating 4G/3G/2G network, virtual private network and other technologies. With 4G/5G wireless WAN dual network backup and Wi-Fi wireless LAN technology, the device provides uninterrupted multiple network access capabilities, and provides users with high-speed and stable data with its comprehensive security and wireless services. transmission channel.
|CPU||Qualcomm MIPS 650Mhz frequency|
|Memory||Onboard SMD DDR2 128MB|
|FLASH||16MB Nor Flash|
|WIFI||802.11.b/g/n (Wi-Fi 4), the highest rate can reach 300Mbps, support 2.4G|
|Network support||Industrial grade 4G full Netcom module, or 3G module|
|system time||Time synchronization using NTP technology|
|Protocol standard||IEEE 802.11b/g/n|
|Antenna support||2.4GHz: 2*2 40MHz|
|WIFI rate||Up to 300Mbps|
|WIFI frequency band||2.412GHz-2.472GHz|
|Operating mode||AP, Client working mode|
|Transmission distance||Visible distance 100 meters (the actual transmission distance depends on the environment)|
|Safety features||Open system, shared key, WPA/WPA2 authentication, WEP/TKIP/AES encryption|
|WIFI software function||Modify SSID, channel switching, support AP mode (relay mode)|
|CAT1||Theoretical transmission rate: uplink 5Mbps, downlink 10Mbps|
|CAT4||Theoretical transmission rate: uplink 50Mbps, downlink 150Mbps (default)|
|CAT6||Theoretical transmission rate: Upstream 100Mbps, Downstream 300Mbps|
|WAN port||1 (can be configured as LAN, 10M/100M adaptive MDI/MDIX port)|
|LAN port||4 (10M/100M adaptive MDI/MDIX ports)|
|SIM card interface||2 (drawer-type card holder, support 1.8V/3V SIM/UIM card) built-in eSIM interface, can be connected to eSIM chip card|
|TF card interface||1 (external TF memory card is available)|
|4G antenna interface||4 channels (4G antenna, impedance 50 ohms, SMA female connector)|
|WIFI antenna interface||2 channels (2.4G WIFI antenna, impedance 50 ohms, SMA female inner pin interface)|
|GPS Antenna||1 (1 GPS antenna, 1 GPS Beidou positioning module is required, this is optional)|
|USB interface||Support 1 channel|
|Reset button||1 (reset button, long press for 5 seconds to restore factory settings|
|1 (DC 5.5* 2.1/2.5 seat)|
|1 (2Pin 3.81mm industrial terminal type interface, support positive and negative connection)|
|Console port||1 external (RS232/RS485 level serial port and GPIO interface)|
|Indicator light||1 WiFi indicator (this light is the SYS power indicator, this light flashes when powered on)|
|1 GPS indicator (when the GPS is connected, the light will flash)|
|2 4G network indicators (when the 4G signal is connected, the corresponding 4G indicator flashes)|
|8 (four sets of RS485 lights)|
|Built-in MINIPCIE interface||Built-in two miniPCIe connectors, install two 4G modules|
|Power and Power Consumption|
|Power supply||External power adapter (12V 2A)|
|Operating Voltage||Power input DC 12V-2A (support wide voltage 9-36V)|
|POE support||Powered PD module (optional)|
|Working power consumption||300～600mA @12V DC|
|Standby power consumption||100～200mA@12V DC|
Q1: Are you a factory or trading company?
-----We are a factory,Our company mainly sells 4G WiFi Router.....
Q2: Do you accept sample order?
------Yes, we can accept sample order.
Q3: What's your warranty policy?
-----We offer 2 year warranty. For goods defected not by personal seasons, we will replace for it.
Q4: What's your payment terms?
------We accept T/T in advance, paypal, or alibaba trade assurance.
Q5:What's the lead time for mass order?
------Normally, it takes about 20-35 days, depends on the order quantity.
Contact Person: Yangquan